Epoxy floors are durable and easy to maintain with the right cleaning and maintenance methods. Remember these go-to tips for daily and weekly care to ensure your epoxy floor stays pristine.
Wipe up spills immediately to prevent oil and chemicals from absorbing into the floor. Also, avoid using harsh chemicals such as vinegar or citrus cleaners that can break down the epoxy surface.
Sweep Daily
Epoxy floors are incredibly strong and abrasion-resistant, but they are not unbreakable. The epoxy coating may be scratched if dirt and grime accumulate, particularly in locations where heavy machinery is often utilized or pushed across the floor.
Regular sweeping will help keep dust, grit, and debris under control. Sweeping should be performed daily in high-traffic areas and weekly in less-trafficked areas. Using a vacuum with a brush attachment is another way to remove dirt from the floor, minimizing scratching and abrasion.
Immediately cleaning spills and drips will also prevent damage to the Seattle epoxy flooring surface. A mild detergent solution should be used when necessary. It is important to neutralize any chemicals, like engine oil, spilled on the floor before washing off the coating. Doing so will minimize the risk of an unwanted reaction between the chemical and the epoxy. A neutralizing solution can easily be made using a bucket of warm water and the cleaning agent of choice.
Vacuum Regularly
In addition to sweeping, regularly vacuum your epoxy floors to remove grit and dirt that can scratch or wear the surface. A commercial or industrial-grade vacuum cleaner with a soft brush attachment is best.
Vacuuming helps to keep your floors sanitary and free of harmful pathogens like bacteria and fungi. This is especially important in areas of your facility prone to moisture, such as public bathrooms or shower stalls.
It is also wise to wash your floors with a neutral pH cleaning solution formulated for use on epoxy surfaces. You can combine this with warm water and a nylon floor scrubber for more efficient cleaning. If you have stains such as grease, oil, or tire marks, it is helpful to pre-treat these with a cleanser specifically formulated for your floors to make them easier to remove. Always rinse your floors after cleaning to ensure that all soap and grime are removed as well.
Scrub Often
Epoxy floors are tough and durable but can still be damaged by grit, dirt, and debris. It’s important to keep these things off the epoxy coating as much as possible, especially in high-traffic areas.
Dirt left on the floor can scratch or etch the epoxy, making it harder to clean and reducing lifespan. This can also increase the risk of bacterial growth and other health concerns.
To help prevent dirt and grit from damaging your epoxy floors, place walk-off mats at entrances to collect and trap any dirt on shoes and boots. You can also use padded mats underneath the car, bicycle, and motorcycle kickstands to protect the epoxy from harsh pressure. For tough stains and marks, use a soft kitchen sponge and water to scrub the area. If necessary, a commercial cleaner made for epoxy floors should be used to remove any remaining residue. If your flooring requires maintenance, there are Budget-Friendly Flooring Solutions available to help you keep your floors looking their best.
Neutralize Chemical Spills
Epoxy flooring are a common option for corporate buildings, industrial areas, and commercial garages because of its excellent performance and minimal maintenance characteristics. However, to maintain their durability and sheen, they need to be cleaned and maintained regularly.
Dirt, grit, and other debris can scratch or dull the epoxy flooring surface if allowed to remain on it for long periods. For this reason, you should sweep and mop regularly to keep the floor dirt-free. Use walk-off mats at entrances or in areas with heavy machinery traffic to catch most of the dirt before it can become embedded in the flooring.
In addition, you should wipe up any chemical spills immediately. This is especially important in areas commonly seeing automobile-related fluids like antifreeze, oil, gasoline, and paint. After wiping up these types of spills, you should rinse the floor with clean water to ensure that any remaining chemical residue doesn’t damage the surface of the epoxy coating.